Pipe Clamps & Modular Supports
Engineered for mechanical plumbing, HVAC chilled water, industrial fluid lines, and electrical conduits. Available in heavy-duty carbon steel (HDG/ZP) and proprietary high-strength aluminum alloy systems for vibration damping, corrosion immunity, and rapid on-site assembly.
Pipe Clamps & Support Categories
Select from our five comprehensive clamp series designed to integrate seamlessly with modular strut channels and industrial framing.
Strut Pipe Clamps
Two-piece interlocking clamps engineered specifically for standard 41×41mm and 41×21mm strut channels. Available with thermoplastic cushioning or rigid steel saddles.
- Size Range: 1/2" to 8" (OD 12mm - 219mm)
- Fastener: Hex head bolt with pre-staked locknut
- Mounting: Direct snap-into channel flange
Express Pipe Clips
Single-screw quick-locking clips and rapid snap-latch clamps designed to save up to 60% installation time in high-volume plumbing and electrical conduit runs.
- Size Range: DN10 to DN100 (12mm - 115mm)
- Mechanism: Quick-closure hinge with captive screw
- Connection: M8/M10 combination dual threaded boss
Rubber Lined Pipe Clamps
Premium split-band pipe clamps with high-grade EPDM rubber lining. Isolates structure-borne acoustic vibration, prevents galvanic corrosion, and absorbs thermal expansion.
- Size Range: DN15 to DN300 (1/2" to 12")
- Lining Temp: -40°C to +110°C (Aging resistant EPDM)
- Acoustic Rating: Up to 18 dB(A) noise absorption
Tube Clips
Single and double saddle tube clips, half-clamps, and conduit straps designed for instrumentation tubing, hydraulic lines, copper pipes, and electrical cables.
- Size Range: 6mm to 54mm outer diameter
- Configurations: 1-Hole strap, 2-Hole saddle, Double-tube
- Materials: Carbon Steel ZP, Stainless Steel 316, Aluminum
Heavy Duty Pipe Clamps
Reinforced two-bolt and three-bolt heavy-duty clamps, riser pipe clamps, and U-bolt assemblies engineered for high loads, large diameter utility mains, and thermal fluid pipelines.
- Size Range: DN50 to DN600 (2" to 24"+)
- Load Capacity: Safe working loads up to 45 kN
- Connections: 1/2" to 1" female thread or clevis lug
Advanced Aluminum & High-Strength Steel Clamping
Lonsonstrut integrates proprietary high-strength aluminum alloy technologies alongside heavy galvanized steel. Compared to traditional welded or heavy carbon steel brackets, our modular systems solve the industry's toughest installation and environmental challenges.
1/3 Weight with High Tensile Strength
Reduces overhead dead weight on building slabs while providing ultra-high tensile strength (up to 728 MPa on specialized alloys), accelerating installation speed.
Zero Rust & Non-Ferromagnetic Properties
Eliminates stray eddy currents near high-voltage cables and utility tunnels, ensuring zero cross-sectional loss from corrosion and zero periodic repainting costs.
Patented Anti-Loosening & 83% Higher Slip Resistance
Precision interlocking mechanical grooves prevent pipe migration during severe dynamic vibration, fluid hammer, and thermal cycles.
Engineering Performance Benchmark
Tested against standard smooth saddle friction clamps.
Certified for high-speed rail, metro, and vibrating pumps.
Pipe Clamp Selection & Compatibility Matrix
Compare key engineering parameters to select the optimum support series for your MEP piping schedule.
| Clamp Series | Diameter Scope | Primary Material | Finishing / Lining | Typical Application |
|---|---|---|---|---|
| Strut Pipe Clamps | 1/2" – 8" (12–219 mm) | Carbon Steel / Al-Alloy | HDG / Zinc Plated / Cushion | Direct framing on 41mm Strut Channels |
| Express Pipe Clips | DN10 – DN100 (12–115 mm) | Carbon Steel Q235B | Electro-Galvanized | Rapid plumbing & light conduit lines |
| Rubber Lined Clamps | DN15 – DN300 (1/2"–12") | Steel / Stainless Steel | EPDM Acoustic Lining (DIN 4109) | HVAC, chilled water, acoustic sensitive areas |
| Tube Clips | OD 6 – 54 mm | Carbon Steel / SS316 / Al | Zinc Plated / Anodized | Hydraulic tubes, copper pipe, electrical cables |
| Heavy Duty Clamps | DN50 – DN600 (2"–24"+) | Q355B Steel / Forged Steel | Hot-Dip Galvanized / Epoxied | High-pressure steam, risers, utility tunnels |
Target Applications & Project References
From underground utility tunnels to hyperscale data center cooling loops, Lonsonstrut support systems provide unyielding structural integrity.
Data Centers
Overhead chilled water manifolds, refrigerant loop support, and heavy power feeder cable clamping with zero eddy-current interference.
Utility Tunnels & Rail
Corrosion-immune aluminum alloy clamps in 220kV power tunnels, metro drainage, and humid underground municipal corridors.
Commercial HVAC
Acoustic rubber-isolated piping supports meeting DIN 4109 for hospitals, hotels, high-rise residential, and corporate offices.
Industrial & Petrochemical
High-load riser clamps and chemical-resistant hardware designed for aggressive environments and high dynamic operational stresses.
Request Quotation & Technical Submittal
Submit your Bill of Materials (BOM), pipe schedules, or technical drawings. Our application engineering team delivers structural verification, load calculations, custom takeoff pricing, and submittal packages within 24 hours.
Technical Request for Quotation
Fields indicated with * are required for engineering takeoff